Juniper Systems Archer 2 User Guide - Manual (Page 13)

Ch 1 Getting Started 9
Navigating Around Your Archer 2
Using Gestures and Making Selections
The Windows ® Embedded Handheld operating system
enhances the ability of the handheld to recognize touch
gestures, making it easy to use a finger to navigate. Use of
the capacitive stylus is an option. The keypad buttons can
also be used.
Navigation options vary depending on the screen you are
viewing. Here is a partial list of options:
Vertical and Horizontal Movement
„
Flick up, down or sideways on the touchscreen.
„
For more precise positioning, touch, hold, and move the
screen up or down.
„
Use the scroll bar if it is available.
„
Use the shifted up down right and left keys to
move around on a screen.
„
A horizontal scrolling menu is located on control panel
screens near the top. Press the left or right arrow keys to
scroll through the topics (this feature replaces tabs).
Make a Selection
Using the Touchscreen
„
Press or tap the function gadget or application icon you
want to select, turn on, activate, or turn off.
„
Press and hold a function gadget to bring up a control
panel, menu, or list.
Using the Keypad
„
Use the shifted up down right and left keys to
select (highlight) a gadget or icon on the screen. A ring
appears around the selection. System Info has been
selected below: