Juniper Systems Archer 2 User Guide - Manual (Page 117)

Ap C Warnings and Regulatory Information 113
CAUTION: Use of controls or adjustments or performance of
procedures other than those specified herein may result in
hazardous radiation exposure.
This barcode scanner is not user-serviceable. Units requiring
service or repair must be returned to the factory.
This barcode scanner is not to be opened or modified
by the user. This product does not require scheduled
maintenance to remain compliant to the applicable
standards.
This laser product is designated as Class 1 during all
procedures of operation. For instructions on activating/
deactivating the laser aimer and LEDs, please read the
section on software operation.
Laser
Wavelength 650nm, nominal
Emission Repetitive Pulsed
Pulse Energy* 7uJ
Pulse Width 9 mSec
Pulse Rep Rate 55Hz, nominal
Divergence 1 Radian XY, approximately
Classification Class 1
LED (Australia New Zealand only)
Wavelength 635nm, peak
Bandwidth FWHM 20nm
Emission Repetitive Pulsed
Pulse Energy* <3.1uJ
Pulse Width 0.98 mSec
Pulse Rep Rate 55 Hz, nominal
Divergence Extents: approach hemispheric
Classification Class 1
Laser & LEDs pulse alternately
* Energy for Classification Purposes
A label with the unit serial number is located on the rear
panel of the device
!