beautypg.com

Juniper Systems Archer 2 User Guide User Manual

Page 71

background image

Ch 7 Camera

67

Flash

To use the flash, select Flash from the Menu, then select

On. The flash automatically turns on each time you take a

photo. To turn it off, select Flash from the menu and select

Off.

Pictures & Videos Control Panel

To view or change additional settings, select Options from

the Menu soft key. The Camera control panel is shown. Use

the horizontal scrolling menu near the top of the screen to

see what the setting are and make changes as needed.

Geotagging

When pictures are geotagged, the date, time, latitude,

longitude, file name, and notes can be included with the

pictures with the emboss and embed options.
Note: Calibrate the compass and accelerometer before

you use Geotagging. Refer to Chapter 3, Programs and

Settings, Compass and Accelerometer Calibration.
Follow these steps:
1. Turn on GPS/GNSS by tapping the GPS/GNSS gadget

on the Home screen and waiting for a fix.