Juniper Systems Archer 2 User Guide - Manual (Page 57)

Ch 5 Wi-Fi Wireless Networking 53
the scan, a list of available networks and their strengths
appears on the Wi-Fi Wireless screen.
3. Tap on the network to which you want to connect. If you
want to add a new network, select Add New from the
top of the list.
4. Configuration and authentication setup screens are
shown. Depending on the network you are connecting
to, you may need to make some selections from
pull down lists and enter information like a passkey.
Some information may not be required or will appear
automatically. When you are finished with the set up
screens, press Finish.
5. Select Network Adapters from the horizontal scrolling
menu near the top of the screen. For connection
options, select The Internet or Work (for office networks).
Other settings can be modified if necessary.
6. If you selected The Internet, you can open Internet
Explorer and begin using the Internet.
Once a Wi-Fi network is set up, the icon on the Home Page
turns blue and the name of the network is shown.
The Archer 2 remembers the Wi-Fi network connections
created.