EVCO EVF818P9 - Manual (Page 10)

EVCO S.p.A. EVF818 | Installer manual ver. 1.0 | Code 144F818E104
page 10 of 76
2 DESCRIPTION
2.1 Description of the user interface
The following drawing illustrates the aspect of the EVF818 user interface.
The following table illustrates the meaning of EVF818 user interface parts.
Part Meaning
1 on/off key, herein called also "ON/STAND-BY key"
2 hard blast chilling or soft deep freezing key, hereon called HARD/SOFT" key
3 communication port with the control module (signal)
4 temperature-controlled cycle/time-controlled cycle key, hereon also called "TIME/TEMPERATURE key"
5 display
6 decrease key, hereon called "DOWN key"
7 increase key, hereon called "UP key"
8 cycle start/cycle cut-off key, hereon called "START/STOP key"
9 communication port with the control module (power supply)
10 programs memorisation/execution key, hereon also called “PROGRAMS key”
11 blast chilling/deep freezing intensity key, hereon also called "BLAST CHILLING INTENSITY key"
12 deep freezing key
13 blast chilling key
For further information, see the next chapters.