3 additional information for electrical connection – EVCO EPD4DF3 Installer manual User Manual
Page 16
EVCO S.p.A.
EVDRIVE03 | User manual ver. 3.4 | Code 144EPDE344
page 16 of 70
4.3
Additional information for electrical connection
-
do not operate on the terminal blocks of the device using electrical or pneumatic screwers
-
if the device has been moved from a cold location to a warm one, the humidity could condense on the inside;
wait about an hour before supplying it
-
make sure the power supply voltage, the electrical frequency and the electrical power of the device correspond
to those of the local power supply; look at chapter 11 “TECHNICAL DATA”
-
disconnect the power supply of the device before servicing it
-
do not use the device as safety device
-
for the repairs and for information about the device please contact the EVCO sales network.