Comtrol RocketPort Serial Hub Series - Manual (Page 80)

80 VS-Link Messages
Windows NT
Cannot detect network
No inbound traffic of any sort is detected.
The VS-Link device may be inoperative or
you may have a network cabling problem.
Cannot detect any
VS-Link units.
Network traffic is being received, but not
from a VS-Link device. Check the network
connections and verify that the VS-Link
device is powered up.
Cannot detect VS-Link
unit with specified
MAC address.
Network traffic is being received from a
VS-Link device, but not the one specified in
Device Setup. Check the device to make sure
that you are using the correct MAC address
in Device Setup, and check the Main Setup
window to verify that you are working with
the correct device.
VS-Link device with
specified MAC address
was detected, but is not
configured for this
server.
Either the VS-Link device in question is not
assigned to this server, or (either in primary
or backup mode), it is not assigned to any
server, or it has been configured for this
server but the configuration has not been
saved. If the latter, return to the Device
Setup window, save and exit, and restart the
server
VS-Link device
detected and
configured for this
server, but is not yet
assigned to this server.
Either the VS-Link device is currently being
controlled by another server (for example, a
backup server), or the device power has been
cycled and the device is waiting for a server
to acquire it.
VS-Link detected,
initializing.
The server has acquired the VS-Link device
and is downloading the control program. The
device will be available shortly.
VS-Link responsive,
but no data traffic
exchange since last
inquiry.
The VS-Link device appears to be installed
correctly and active, but no data traffic has
been sent or received since the last time you
clicked the Refresh button. If there should
have been traffic, check the VS-Link port
configuration and external cabling.
VS-Link responsive;
data traffic received,
but nothing sent since
last inquiry.
Similar to above, except the VS-Link device
has received data successfully.
Table 5. VS-Link Summary Messages (Continued)
Message Description