Comtrol RocketPort Serial Hub Series - Manual (Page 58)

58 Printer Configuration
Windows NT
Printer Configuration
Use this section to connect a serial printer.
Adding Serial Printers
Follow these steps to configure a serial printer in Windows NT:
1. Connect the printer to the desired port. Use a DTE-to-DTE null
modem cable unless the printer maker specifies otherwise.
2. Open the Printers control panel and double-click on the Add
Printer icon. The Add Printer Wizard starts.
3. Click the My Computer checkbox, then the Next button.
Note: This differs from Windows NT 3.51. Under NT 3.51,
printers on Comtrol ports are network devices.