Comtrol RocketPort Serial Hub Series - Manual (Page 57)

RAS Installation and Configuration 57
Windows NT
14. If you select IPX, the following window displays. Make the
appropriate selection for your environment and press OK.
15. Click OK to exit the Network Configuration screen and return to
the Remote Access Setup screen.
16. If you want to duplicate the configuration you just created on any
other COM port (modem), highlight the COM port number and
click Clone. Otherwise, repeat Steps 8 through 15 for each COM
port (modem) you want to set up.
17. After setting up all the COM ports, click the Continue button.
18. Click the Close button at the Network/Services tab to complete the
RAS installation.
19. Click Yes when asked to reboot the computer.
Windows NT RAS installation is complete.
20. If necessary, install the latest NT Service Pack or Packs from
Microsoft.