Comtrol RocketPort Serial Hub Series - Manual (Page 55)

RAS Installation and Configuration 55
Windows NT
The Network Configuration window displays:
11. Select the appropriate dial out protocols, dial in protocols, logon
security levels, enable multilink (if required) and click OK.
Note: Only previously configured protocols are selectable. If you
want to set up a protocol that is grayed out, you must first
add it using the Network Protocols tab.
If you selected “Receive calls only” on all ports while configuring
the port usage, the “Dial out Protocols” area will be shaded.
Windows NT 4.0: If you want to use Multilink PPP (bonding), make
sure that you click the Enable Multilink checkbox.
For detailed information about the configuration screens, use the
Help button or the Windows NT CD-ROM (Support/books/
server.hlp file to locate information).
The following steps are dependent upon the protocol selections
made in this screen.