Comtrol RocketPort Serial Hub Series - Manual (Page 75)

Using Peer Tracer (peer.exe) 75
Windows NT
Using Peer
To use peer, simply type in commands at the : prompt. (It may be
necessary to press Enter to make the : prompt appear.) For example, to
examine COM5, type:
PORT COM5
To gather some information about the port, type:
STAT
This should return details about the port.
To turn on monitoring of any calls into driver (events), type:
MON EV
To send strings and commands to attached peripherals—for example,
to send “ATH0” to a modem—type:
SEND ATH0
A return and linefeed are always appended to each string sent.
Other Commands
Enter commands at the : prompt and follow each command with Enter.
Keep in mind that all commands are processed in the driver, and that
Peer simply acts as a conduit for this information.
For more information, see the Peer.hlp help file.
Table 4. Peer Tracer Commands
Command Effect
MON TX
Monitor data being transmitted
through the selected port.
MON RX
Monitor data being received
through the selected port.
M Turn off all monitoring.
?
Display Peer Tracer command
summary.
PORT COMxx
Change port being examined to
COMxx.