Comtrol RocketPort Serial Hub Series - Manual (Page 47)

Configuring Modems 47
Windows NT
The Install New Modem window displays:
5. Check the “Don’t detect my modem...” box and click Next.
Note: While Windows NT can automatically detect modems, we
advise against using this option as auto-detect may cause
some multiprocessor systems to lock up.
The list of modem manufacturers and models displays.
6. Select the appropriate manufacturer and model and click OK.
If the correct manufacturer and model do not appear on the list,
click Have Disk to install software from a manufacturer-supplied
installation diskette.
A list of all available COM ports displays:
7. Select the port on which you wish to install the modem. If you
have multiple modems of the same type (for example, four
RocketModem cards), you can select more than one port and
install all the modems at the same time.
8. Click Next. The modem software is installed on the selected ports.
Depending on prior configuration, you may be asked to enter your
country of use, area code, the number you dial to get an outside
line, and whether you have tone or pulse dialing at this time.
9. Click Finish.
The Modems Properties dialog box displays: