Comtrol RocketPort Serial Hub Series - Manual (Page 42)

42 Using VS-Link
Windows NT
• Map 2 stop bits to 1
Note: You can use this option to map 2 stop bits to 1 bit. Leave
this box unchecked to enable stop bits to pass through
unchanged.
• Wait for physical transmission before write
Note: Use this option to force all write packets to wait until the
transmit data has physically completed the transmission
before returning completion to the host application. The
default mode (box not checked) is to buffer the data in the
transmit hardware buffer and return completion as soon as
the packet is in the buffer.
• Clone port settings
Note: If this box is not checked, the changes you make to the Port
Setup options apply to the selected port only. If this box is
checked, the changes you make to the Port Setup options are
applied to all Comtrol VS-series and RocketPort Serial Hub
ports in the system.
6. Click the OK button.
7. Optionally, complete RS-485 configuration, highlight the COM
port that you want to toggle RS-485.