Kofax INDICIUS 6.0 - Manual (Page 112)

Chapter 4
102 Getting Started Guide (Classification and Separation)
5
Select File | Exit to close Script Editor.
Test Classification
The configuration is again tested on the Test Documents set in Recognition Test Tool.
X To test the configuration
1
Open Recognition Test Tool.
2
Open the project used to test page classification and separation.
Note You can open the project from the recent projects on the File menu. By
default it will be:
My Documents\Test Projects\Page Classification and Separation.rtp
3 Click Run Test.
4 Once the test has finished, select one of the document type tabs (but do not
select the Header tab).
5
Select one of the documents.
6
Click Script Messages in the bottom left panel.
If the message “Running classification by image” is displayed, page image
classification has run.
7 Select the Summary tab.
You can see from the lengths of the documents that the addition of page
image classification has improved separation.
Note
More detailed analysis of performance will be done in the next step.
Do not close Recognition Test Tool.
Step 5: Test and Evaluate Performance
This step includes analyzing test results in Recognition Test Tool and more detailed
performance evaluation using the BatchCompare utility.