KEYENCE AutoID - Manual (Page 98)

5-2
OT
HER SETT
INGS AND OPERA
T
ION
S
5
5-1 Settings Macros
This section describes how to register macros to the RF-500 Series and switch macros.
Macros and Active Macros
Up to three macros can be registered to an RF-500 Series.
Switch the Macro 1 to Macro 3 tabs to select the respective operations.
On the RF-500 Series, one of registered macros 1 to 3 can be set as the active macro. The active
macro is the macro that is executed by a trigger.
Item Description
(1) Selection of macro
Switch macro operation by Macro 1, Macro 2 and Macro 3 to display the
macro.
(2) Selection of active macro
Select the trigger input and macro to be executed by the [M*] command from
the pulldown menu.
(3) [Act setting] tab
Sets 16 operation commands.
"Act Setting" (page 5-4)
(4) [Macro test] tab
Performs an operation test on the currently displayed macro.
"Macro Test" (page 5-5)
(1) Selection of macro
(4) [Macro test] tab
(2) Selection of active macro
(3) [Act setting] tab