KEYENCE AutoID - Manual (Page 60)

4-10
SETT
ING DEVICE OPER
A
T
IONS
4
4-2 RF-500 Series Settings
RS-232C Port Setting
This section describes the [RS-232C port setting] tab for the head.
Item Description
Baud rate Select the baud rate (bit/s) from the pulldown menu.
Parity Select None, Even or Odd for Parity.
Data bits Select 7 bits or 8 bits for Data bits.
Stop bit Select 1 bit or 2 bits for Stop bit.
Protocol
Select None, PASS/RTRY, ACK/NAK or Multi-drop as the software-based
communication protocol.
ID (1 to 31)
Set the ID No. of the head.
This is set when "Multi-drop" is set at Protocol.
RTS/CTS protocol
Select Disable or Enable for RTS/CTS protocol.
Set this when the Protocol setting is other than "Multi-drop".