KEYENCE AutoID - Manual (Page 55)

SETT
ING DEVICE OPER
A
T
IONS
4
4-5
4-2 RF-500 Series Settings
Parameters to be Set
There are four parameter items to be set up for the head. Switch to the desired setting item by
clicking the respective tab and set the parameters on that tab.
Setting Item Description See Page
(1) Act setting This tab is for setting the trigger mode and I/O terminals. 4-6
(2) RFID
communication
setting
This tab is for making the settings for communication with an IC tag.
Write protection and UID authentication passwords are also set in this
item.
4-7
(3) Output data setting This tab is for making the data output settings. 4-9
(4) RS-232 port setting
This tab is for setting devices connected to the head, and for setting
the communication speed, parity and other communication settings.
4-10
(1) Act setting
(2) RFID communi-
cation setting
(3) Output data
setting (4) RS-232 port setting