Memo, Memo -3 – KEYENCE AutoID User Manual

Page 53

4-3

4-1

Setting IC Tags

SETT

ING DEVICE OPER

IONS

Memo

The following describes the settings of the [MEMO] tab for IC tags.

Item

Description

(1) Section Memo

Displays the details of IC tag memory divided up into section.
Details can be edit with a selection section appended with an area name.

(2) Details memo

Details can be edited when areas within a selected section are further divided
up into section.

(3) Tag information

Displays the type and memory size of the currently set IC tag.
* In the case of general-purpose IC tags, click the "Edit size" button to set the

size matched to the memory size of the IC tag you are using.

(4) Specification of area

name

Enter the name of the area.

(5) Specification of area

color/protection

Select the display color of the area from the pulldown menu.
Color and protection can be specified only for Section Memo and cannot be
specified for Details memo.
* Protection cannot be specified to areas straddling blocks.

Protection can be specified to Section Memos at the boundary of blocks for an
IC tag currently being edited.

* IC tag memory is configured in 4-byte or 8-byte units called "blocks."

T5P10 and T5M** are configured in 4 bytes per block, and T5F** is configured
in 8 bytes per block. For details, refer to the

"RF-500 Series Operation

Manual"

(6) Specification of area to

be secured

To secure area, specify the start of the address at [Start], and enter the end
address or the size of the area to be secured.
To specify the end address, click [End Address]. To specify by the size to be
secured, click [Size] and enter the size of the area to be secured.

(7) "Add"/"Edit" button

The "Add" button is displayed when an area is newly set.
The "Edit" button is displayed when an already set area is selected.

(8) "Delete" button

Deletes the area currently being set (or changed).