KEYENCE AutoID - Manual (Page 81)

4-31
4-6 CC-Link Controller (NX-50CL) Settings
SETT
ING DEVICE OPER
A
T
IONS
4
RS-232C (modular) Setting
The following describes the settings of the [RS-232C (modular) setting] tab for the NX-50CL.
Item Description
Baud rate Select the baud rate (bit/s) from the pulldown menu.
Parity Select None, Even or Odd for Parity.
Data bits Select 7 bits or 8 bits for Data bits.
Stop bit Select 1 bit or 2 bits for Stop bit.
IN1 output to host Select Disable/Enable for IN1 output to host.
IN2 output to host Select Disable/Enable for IN2 output to host.
Send data Select Disable/Enable for Send data.
IN data format Set the format for output to host.