KEYENCE AutoID - Manual (Page 69)

4-19
4-4 SR-500 Series Settings
SETT
ING DEVICE OPER
A
T
IONS
4
Act Setting
This section describes the settings for the read mode and data transmission.
Item Description
Read mode
Select the single mode or the multi mode. If the multi mode is selected, set
the repeat-reading interval and the pointer light time.
Data-send timing Set the timing at which to send data.
Multi Repeat-reading interval Set the repeat-reading interval. (100 to 25 500 ms, 100 ms increment)
Multi Pointer-lighting interval Set the lighting time of the laser pointer. (0 to 990 ms, 10 ms increment)
Additional information
Select the information to be added to the read data.
PMI preset value Enter a value for adding the predictive maintenance information.
Read error
Set an error code to issue when a code cannot be read. Specify within eight
characters. No error code is sent if left blank.