KEYENCE AutoID - Manual (Page 87)

4-37
4-7 DeviceNet Controller (NX-50DN) Settings
SETT
ING DEVICE OPER
A
T
IONS
4
Head Setting
The following describes the settings of the [Head setting] tab for the NX-50DN.
Item Description
Autoconnection with head
Select Disable/Enable for Autoconnection with head.The following settings are
disabled when Autoconnection with head is set to Enabled.
Baud rate Select the baud rate (bit/s) from the pulldown menu.
Parity Select None, Even or Odd for Parity.
Data bits Select 7 bits or 8 bits for Data bits.
Stop bit Select 1 bit or 2 bits for Stop bit.