KEYENCE AutoID - Manual (Page 57)

4-7
4-2 RF-500 Series Settings
SETT
ING DEVICE OPER
A
T
IONS
4
RFID Communication Setting
This section describes the [RFID communication setting] tab for the head.
■ Radio communication setting
■ Radio communication enable setting
Item Description
Tag 1/2/3
Select the IC tag to be registered to the head.
Set Tag 2 and Tag 3 by the "Optional tag" button.
"4-1 Setting IC Tags" (page 4-2)
Active tag Specify which of Tag 1 to Tag 3 is to be used for the head.
Check read Set Disable/Enable for check read.
Write-protect Set Disable/Enable for Write-protect
"Optional tag" button
Click this button to set types Tag 2 and Tag 3.
When registering a general tag, click General-tag and select the tag from
the pulldown menu.
Item Description
Communication enable
message
Set Send or Don’t send for Communication enable message.
Count of communication
success Set the successful communication count within the range 1 to 255 times.
Set this when "Communication enable message" is set to send.