KEYENCE AutoID - Manual (Page 89)

4-39
4-7 DeviceNet Controller (NX-50DN) Settings
SETT
ING DEVICE OPER
A
T
IONS
4
DeviceNet Setting
The following describes the settings of the [DeviceNet setting] tab for the NX-50DN.
Item Description
Slave ID (ID) Select 0 to 63 as the slave ID of the NX-50DN.
Baud rate Select the baud rate (bit/s) from the pulldown menu.
Master → NX-50DN
Write size Select the write size from the pulldown menu.
Output-data size
Displays the number of bytes of the output data.
* This numerical value becomes the size of the DeviceNet link data.
NX-50DN → Master
Read size Select the read size from the pulldown menu.
Input-data size
Displays the number of bytes of the input data.
* This numerical value becomes the size of the DeviceNet link data.
"Save EDS file" button Saves the settings as a EDS file.