KEYENCE AutoID - Manual (Page 13)

BEFORE YOU ST
A
R
T U
S
IN
G A
u
to
ID Nav
igat
o
r
1
1-3
1-2 Operating Environment and System Configuration
This section describes the operating environment, system configuration, features and functions of
AutoID Navigator.
Be sure to read this section before using AutoID Navigator.
Operating Environment and System Configuration
The following environment is required to run the AutoID System Integrated Setup Software
AutoID Navigator.
Make sure that the system you are using satisfies the following conditions and that all of the
required hardware is present.
Item Description
OS
Windows XP (SP1 or later)
Windows 2000 (SP2 or later)
CPU PentiumIII 600MHz or more
Memory 128MB or more
Hard disk 400MB or more
CD-ROM drive Required for installation
RS-232C port
D-Sub 9-pin RS-232C port
This is required to communicate with an NX Series (network controller),
N-410 (RS-485 master unit) and BL-U1/U2 (dedicated power supply unit).