KEYENCE AutoID - Manual (Page 74)

4-24
SETT
ING DEVICE OPER
A
T
IONS
4
4-4 SR-500 Series Settings
Other Settings
This section describes other operation conditions.
Item Description
Verification setting/Preset
data
Register the verification start position, number of digits, and preset data.
Tune switch
Set the operations of the Tune switch and the Test switch.
Test switch
Pointer setting
Set the lighting condition of the laser pointer.
Where NG image is saved Set the save destination of NG images.
Segment LED Set whether or not to display the camera parameter number.
I/O setting
Set the output terminal ON time (10 to 2550 ms, 10 ms increment)
Output Busy term:
Sets the operation of the BUSY terminal.
Output upon power-up: Issues the BUSY output when the power
turns on.
Output NG term at reading error: Set this when the BL-U1/U2 is used.
The read error signal can be output from
the NG terminal.
External light Disables the LEDs on the unit when using an external light.