KEYENCE AutoID - Manual (Page 25)

2-3
2-1 Starting Up and Quitting AutoID Navigator
OUT
L
INE OF A
u
to
ID Navi
gato
r
2
Option Settings
The following describes the option settings on AutoID Navigator.
With the option settings, set the COM port and communications parameters that are used for
communicating between AutoID devices and the personal computer where AutoID Navigator is
installed.
1
Start up AutoID Navigator and click .
2
Select the COM port (RS-232C) on the personal computer and click the "OK" button.
• When "Manual" is selected as the connection method, select parameters
matched to the devices to be connected.
• When connecting the DV-90 Series using its USB port, select "DV-90 PC
Direct". Also, be sure to set the DV-90 Series to the direct communication
mode.
Note