KEYENCE AutoID - Manual (Page 92)

4-42
SETT
ING DEVICE OPER
A
T
IONS
4
4-8 RS-485 Master Unit (N-410) Settings
Slave Setting
The following describes the settings of the [Slave setting] tab for the N-410.
The slave station can be set within the range 1 to 31 stations.
Item Description
ID setup
Select from None, N48+BL (SR), N48+RF, 50RS+BL (SR), and 50RS+RF.
• N48+BL (SR) . Combination of N-48 or BL-U1 and BL/SR Series
• N48+RF . . . . . Combination of N-48 or BL-U1 and RF Series
• 50RS+BL (SR) Combination of NX-50RS and BL/SR Series
• 50RS+RF . . . Combination of NX-50RS and RF Series
* Select "None" when no slave station exists for the corresponding ID No.
Slave station enable/
disable setting Select Disable/Enable for a registered slave station.
To enable a registered slave station, mark the checkbox.