Panasonic KX-F3100 - Manual (Page 86)

3
4
5
6
7
8
Press the desired BROADCAST (1 to 5).
Example: The broadcast number is 1.
BRDCAST.1 MODE=DIAL
[1.DIAL 2.PROG.]
Press 2.
BRDCAST.1 MODE=PROG
[1.DIAL 2.PROG.]
- If you use this key as a direct call station key,
press 1 instead of 2. See page 81.
Press SET to store your selection into memory.
ENTER PHONE NUMBER
: [ 001 ]
Enter the phone number by using the direct call
station key or the speed dial station.
Example:The phone number is the direct call
station 6.
ENTER PHONE NUMBER
= [001]
NOTE:
- When entering the phone number by using a full
number, only one station will be acceptable.
Press SET to store the number into memory.
ENTER PHONE NUMBER
: [ 002 ]
- To enter other phone numbers, repeat steps 6 and
7 (up to 127 stations).
Press SET again after entering all the desired phone
numbers.
SELECT AUTO OR
DIRECT CALL KEY
84