Transmitting documents, Before transmitting documents – Panasonic KX-F3100 User Manual
Page 54
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Transmitting Documents
Before transmitting documents
Acceptable documents:
The unit can transmit documents that meet the following conditions:
- Document width should be from 128 to 216 mm (5" to SV^")-
- Maximum document length should not exceed 660 mm {26"').
- Effective scanning width can be up to 208 mm (8^/,/).
- Number of pages that can be set in the document feeder tray must not exceed 20 pages.
- Document weight:
Single sheet:
45 to 90 g/m^ {12 to 24 lb.)
Multiple sheets: 60 to 75 g/m^ (16 to 20 lb.)
Minimum document size Maximum document size Effective scanning width
128 mm
(5")
Unacceptable documents:
216 mm
(8v;')
-208 mm-H
(8^/,;')
Paper width
216 mm {8V/)
The following documents may cause a jam:
- Documents bound with clips, staples, or other similar objects
- Documents on which ink, paste, or correction fluid has not completely dried
Do not use the following types of documents. Make a clear copy of these documents and then
feed the copy into the unit.
- Paper with a chemically treated surface, such as carbon paper or carbonless duplicating
paper
- Electrostatically charged paper
- Heavily curled, creased, or torn paper
- Paper with a coated surface
- Small-sized paper such as a slip or voucher
- Thin paper less than 45 g/m^ {12 lb.)
- Thick paper over 90 g/m^ {24 lb.)
- Paper with faint contrast between the print and the background
- Paper with printing on the reverse side that can be seen through the front (e.g. newspaper)
52