Panasonic KX-F3100 User Manual
Page 196
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

DISPLAY MESSAGE
CAUSE & SOLUTION
JAN 1 12:00AM 00 00
* . POLLING ERROR ^
JAN 1 12:00AM 00 00
RECORD ANS-GREETING
JAia 1 12:00AM 00 00
RECORD TEL-GREETING
JAN 1 12:00AM 00 00
REDIAL TIME OUT
JAN 1 12:00AM 00 00
- REMOVE DOCUMENT
JAN 1 12:00AM 00 00
.* c SUPPLY TONER - ^
JAN 1 12;00AM 05 00
TIME LEFT =
0m30s
JAN 1 12:00AM 00 00
t - TONER EMPTY » ,
JAN 1 12:00AM 00 00
-i TRANSMIT ERROR -
JAN 1 12:00AM 00 00
WAITING TO PRINT
JAN 1
12 : OOAJd
— 00
^ ' -
WARM UP
►The polling passcode does not match. Check the other
party and set the same passcode as the other unit. See
page 110.
Note that polling by using the passcode is effective
between the compatible machines.
►
The other unit does not provide the polled function.
Check the other party.
►The greetine message for the
ANS/FAX
mode is not
recorded. Record your greeting message. See page 34.
►The greeting message for the
TEL/FAX
mode is not
recorded. Record your greeting message. See page 34.
►The automatic redialing was not successful due to a
busy line or no answer from the other party. Try again.
►
A document is jammed. Open the upper cover and
remove the document causing the problem. See page
202
.
•The unit attempted to transmit a document longer than
660 mm (26"). Press the STOP/CLEAR button and
remove the document. Divide it into two or more pages,
and try again.
•Toner supply is low. Replace the toner cartridge with a
new one. See page 210.
Once this message has been displayed, the unit can
print approximately 50 more pages.
•If the remaining time for recording messages is little,
erase useless messages from memory. See page 72.
•Toner supply is completely consumed. Replace the
toner cartridge with a new one. See page 210.
• A transmission error has occurred. Try again.
• Your network passcode does not correspond to the
other party’s. Check the network passcode. See page
123.
•The polling passcode does not match. Check the other
party and set the same passcode as the other unit. See
page 110.
Note that polling by using the passcode is effective
between the compatible machines.
•The unit has run out of recording paper while printing.
Supply paper. See page 25.
•The recording paper jammed while printing.
Remove the paper causing the problem. See page 202.
•The printer is warming up. Wait until warm-up is
completed.
194