Panasonic KX-F3100 - Manual (Page 127)

Programming the network passcode
To activate this feature, the identical network passcode must be pre-programmed, both on your
unit and on the other compatible machine(s).
The network passcode should be set any 4-digit number except "0000”.
IMPORTANT:
- The network passcode is pre-programmed to “0000”, which wili not activate the network
communication.
1
2
3
4
5
UEittOnV ffc ’X
directory
[
Press MENU until the following is shown.
PROG.[1.DATE 2.TEL
3.SYSTEM 4.REPORT]
Press #, then press 12 to start programming.
NETWORK PASSCODE
= 0 0 0 0
Enter the desired 4-digit passcode (choose 0001 to
9999).
- To correct an error, use the cursor key ( ^ or ► )
to move the cursor to the incorrect number, then
make the correction.
Press SET to store the program into memory.
PROG.[1.DATE 2.TEL
3.SYSTEM 4.REPORT]
Press STOP/CLEAR to end the operation.
125