Panasonic KX-F3100 - Manual (Page 198)

General corrective measures
GENERAL
PROBLEM CAUSE & SOLUTION
The unit does not operate
properly.
•Turn the power switch off, then turn it on again.
• Disconnect the unit from the telephone line and connect
a known working phone. If the known working phone
operates properly, call your service center to have the
unit repaired. If the known working phone does not
operate properly, consult your telephone company.
Cannot transmit, receive a
document, or talk.
'Telephone line cord is connected incorrectly or not
connected. Confirm the connection. See page 30.
Cannot make a call.
'Confirm your line condition and set the dialing mode
selector properly. See page 32.
The ALARM indicator light is on. 'The printer cover or cartridge compartment cover is
open. Close firmly.
The unit does not ring. • The ringer volume selector is set in the OFF position.
Set the ringer volume selector in the HIGH or LOW
position. See page 32.
•ANS/FAX ring count is set to “RINGER OFF”. Change
the programming. See page 163.
FAX TRANSMISSION
PROBLEM CAUSE & SOLUTION
The ALARM indicator light
flashes after transmission. 'A transmission error has occurred. Try again.
The ALARM indicator light is on
during transmission. • A document more than 660 mm (26") is being
transmitted. Divide the document into two or more
pages, and try again.
• A document is jammed. Remove it, then try again.
See page 200.
•The unit has received special tones for special
telephone services, such as call waiting. Cancel such
services, or connect the unit to a line that does not have
such services.
196