Panasonic KX-F3100 User Manual

Page 25

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Do not touch

Magnet roller

Protective bag

Drum unit

Remove the shipping cover pads by pulling them

outward.

Press the tab of the shipping cover firmly toward the

front, and lift the rear side of the shipping cover up

and remove it by pulling it outward.

CAUTfON:

- Do not touch the lens and magnet roller.

NOTE:

- Place the shipping cover in the shipping cover bag

to ensure toner residue does not spill. Place this

bag and the shipping pads in the storage bag and
keep them in the event that the unit must be
repacked and transported (see page 224).

Open the protective bag by cutting the end of the

bag and remove the drum unit.

NOTES:

- Do not expose the drum unit to light for more than

5 minutes as it may damage the drum unit.

- Place the protective bag in the storage bag and

keep it in the event that the unit must be repacked

and transported (see page 224).

Remove the drum protection cap by pushing the

right and left tabs inward.

NOTES:

- Do not touch the green drum surface under the

protection cap as it may damage the drum unit.

- Place the protection cap in the storage bag and

keep it in the event that the unit must be repacked

and transported (see page 223).

(continued)