Panasonic KX-F3100 - Manual (Page 163)

To change the individual transmission report setting, proceed as follows:
HELPFUL HINT:
- If you lose your instructions while programming, press the HELP button.
The unit will print information on how to program.
1
2
3
4
5
Press MENU until the following is shown.
PROG.[1.DATE 2.TEL
3.SYSTEM 4.REPORT]
Press #, then press 04 to start programming.
XMT REPORT =ERROR
[1.ERROR 2.ON 3.OFF]
CZll
I
2
]
3| Enter the number of the selection you desire.
6 \ o
D o
Setting selections:
1: ERROR (only when any trouble occurred)
2: ON (everytime after transmission)
3: OFF (de-activation of this feature)
Press SET to store your selection into memory.
PROG.[1.DATE 2.TEL
3.SYSTEM 4.REPORT]
Press STOP/CLEAR to end the operation.
161