Panasonic KX-F3100 - Manual (Page 50)

To enter numbers, symbols, and characters:
Close the station key cover, and enter the characters using the following keys.
ICursor keys
4 key (RECEIVE MODE button):
The cursor is moved one space to the left
each time you press this key.
^ key (ORIGINAL button):
The cursor is moved one space to the right
each time you press this key.
■Character keys and dial keypad
The character on the display is changed each
time you press one of these keys.
For example, when you press 2 repeatedly, the
display shows:
A —> B —>
C —^ a —^ b —^ c —^ 2 —> A
To enter a character and move to the next
character, press ^ (ORIGINAL button) once.
I Command keys
SPACE key:
This key is used to replace one character to the
space.
HYPHEN key:
This key is used to enter a hyphen.
BACK SPACE key:
This key is used to delete one character to the
left side of the cursor while it moves backward.
e.g., Panasojnic —> Panasonic
1. Press 4 repeatedly until the cursor is
positioned on “n”.
ENTER YOUR LOGO
=Panasoifflic
2. Press BACK SPACE.
ENTER YOUR LOGO
=PanasoHic
SECRET key:
To keep a phone number secret while storing it
into memory for automatic dialer, press the
SECRET key at the beginning and end of the
phone number.
For further details, see page 87.
DISPLAY CLEAR key:
This key is used to erase all the characters
entered.
DELETE key:
This key is used to delete one character.
e.g., Panassonic -> Panasonic
1. Press ^ repeatedly until the cursor is
positioned on “s”.
ENTER YOUR LOGO
=Panas@onic
2. Press DELETE.
ENTER YOUR LOGO
=Panas0nic
INSERT key:
This key is used to insert one character or one
space.
e.g., Panapnic -> Panasonic
1. Press 4 repeatedly until the cursor is
positioned on “o”.
ENTER YOUR LOGO
=Pana0nic
2. Press INSERT, then press 7 repeatedly
until “s” is shown.
ENTER YOUR LOGO
=Panasonic
48