Setting the transmission speed – Panasonic KX-F3100 User Manual
Page 186
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the Transmission Speed
The unit automatically selects the optimum transmitting speed, depending on the line condition
and the type of the other facsimile unit. But, if problems such as transmission errors caused by
poor line condition frequently occur, lower the speed manually by one rank.
The following transmission speeds are available;
High:
9600 bits per second (pre-selected setting).
Middle high: 7200 bits per second.
Middle low:
4800 bits per second.
Low:
2400 bits per second.
1
2
3
4
5
Press MENU until the following is shown.
PROG.[1.DATE 2.TEL
3.SYSTEM 4.REPORT]
Press #, then press 28 to start programming.
TX SPEED=9600BPS[A]
[l.A 2.B 3.0 4.D]
Enter the number of the selection you desire.
Setting selections:
1: A (9600 BPS)
B (7200 BPS)
C (4800 BPS)
D (2400 BPS) •
Press SET to store your selection into memory.
PROG. t1.DATE 2.TEL
3.SYSTEM 4.REPORT]
Press STOP/CLEAR to end the operation.
184