Helpful hint for setting the dialing mode, Setting selectors – Panasonic KX-F3100 User Manual

Page 34

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Setting selectors

Dialing mode selector:

If your telephone line has touch tone service, set the selector to TONE.
If your telephone line has rotary pulse dial service, set the selector to PULSE.

HELPFUL HINT for setting the dialing mode:

- You can ascertain what type of exchange the unit is connected to by using the following

procedure:

1. Ensure that the dialing mode selector is set to TONE.

2. Lift the handset, then listen for the dial tone.
3. Dial a familiar number.
4. If the call is successful, the unit is connected to a tone exchange. Leave the selector set to

TONE.

5. If the call is not successful, the unit is connected to a pulse exchange. Switch the selector

to PULSE.

Ringer volume selector:

HIGH: The ringing sound of your unit will be loud.

LOW: The ringing sound of your unit will be soft.

OFF: The unit will not ring.