Notes – Panasonic KX-F3100 User Manual

Page 23

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Peel off the green tape.

Hold the unit firmly, and completely remove the

clear plastic sealing film by grasping it and pulling it
outward.

NOTES:

- Do not twist the sealing film while pulling it,

because toner may spill over.

- Be careful not to make the surrounding area dirty

when handling the sealing film, because it may
contain toner residue.

Tap the toner cartridge lightly to empty toner into the

developer unit.

Remove the paper backing of the sealing tape

provided, and press this tape over the slot on the
rear side of the toner cartridge.

(continued)