2 image file download using tftp, 2 image file download using tftp -51, Section 5.15.2 – Cabletron Systems 2M46-04R User Manual
Page 99: Describes ho
Flash Download Screen
2M46-04R/2M46-04RDC User’s Guide
5-51
4.
Set the IP address of the TFTP gateway server (this defaults to the
same IP address set in the TFTP Gateway IP Addr field in the General
Configuration screen).
5.
Use the arrow keys to highlight EXECUTE at the bottom of the screen
and press ENTER. The message “BOOTP DOWNLOAD. WILL
COMMIT TO FLASH. REBOOT IN PROGRESS...” displays in the
event message line at the top of the screen and the new image is
downloaded into FLASH memory.
5.15.2
Image File Download Using TFTP
To download a firmware image into FLASH using TFTP, proceed as
follows:
1.
Use the arrow keys to highlight the Download Method field.
2.
Use the SPACE bar to select TFTP.
3.
Use the arrow keys to highlight the TFTP Gateway IP Addr field.
4.
Set the IP address of the TFTP gateway server (this defaults to the
same IP address as that set in the TFTP Gateway IP Addr field on the
General Configuration screen).
5.
Use the arrow keys to highlight the Download Server IP field.
6.
Enter the IP address of the TFTP server using the DDN format.
For example: 134.141.79.121
7.
Use the arrow keys to highlight the Download File Name field.
8.
Enter the complete path and file name of the image stored on the
download server.
For example: /tftpboot/2M46.hex
9.
Use the arrow keys to highlight EXECUTE at the bottom of the screen
and press ENTER. The message “TFTP DOWNLOAD. WILL
COMMIT TO FLASH. REBOOT IN PROGRESS...” displays in the
event message line at the top of the screen and the new image is
downloaded into FLASH memory.