2 special commands, 2 special commands -80 – Cabletron Systems 2M46-04R User Manual
Page 128
Chapter 5: Local Management
5-80
2M46-04R/2M46-04RDC User’s Guide
atm_stp_state:
Syntax:
atm_stp_state [STATE]
Description:
The atm_stp_state command allows the user to
enable, disable, or check the status of the
Spanning Tree Algorithm on all ATM
interfaces. The user must specify the STATE
option as enable, disable, or status. The STATE
field is mandatory.
Options:
enable, disable, status
Example:
5.22.2
Special Commands
done, quit, exit:
Syntax:
done, quit, or exit
Description:
The done, quit, or exit command enables the
user to exit from Network Tools and return to
the Main Menu screen.
Options:
Not Applicable
Example:
NOTE
The atm_stp_state command is only available if an
HSIM-A6DP is installed in the device.
The device must be manually reset for this setting to take
effect.
-> atm_stp_state status
Atm Stp is Enabled
-> atm_stp_state disable
-> atm_stp_state enable
099998
-> done
051472