beautypg.com

6 device configuration menu screen, Device configuration menu screen -14, Specific to each port. f – Cabletron Systems 2M46-04R User Manual

Page 62: Screen, refer to, Section 5.6

background image

Chapter 5: Local Management

5-14

2M46-04R/2M46-04RDC User’s Guide

5.6

DEVICE CONFIGURATION MENU SCREEN

The Device Configuration Menu screen,

Figure 5-8

, provides access to

Local Management screens that allow you to configure and monitor
operating parameters, modify SNMP community names, set SNMP traps,
configure switch parameters, and configure 2M46-04R ports.

To access the Device Configuration Menu screen from the Device Menu
screen, use the arrow keys to highlight the DEVICE
CONFIGURATION
menu item and press ENTER. The Device
Configuration Menu screen displays.

Figure 5-8

Device Configuration Menu Screen

NOTE

The Switch Configuration menu will only display if the
operational mode of the device has been set to 802.1D
SWITCHING or 802.1Q SWITCHING. Refer to

Section 5.7.9

for instructions on configuring the device to operate in this
mode.

Firmware Revision: XX.XX.XX

Device Configuration Menu

GENERAL CONFIGURATION

SNMP COMMUNITY NAMES

SNMP TRAPS

SWITCH CONFIGURATION

SMARTTRUNK CONFIGURATION

DEVICE SPECIFIC CONFIGURATION

2314_66

Device Type: 2M46-04R

BOOTPROM Revision: XX.XX.XX

2M46-04R LOCAL MANAGEMENT

RETURN

EXIT

This manual is related to the following products: