Cabletron Systems 2M46-04R - Manual (Page 127)

Network Tools
2M46-04R/2M46-04RDC User’s Guide 5-79
Example:
link_trap:
Syntax: link_trap [enable/disable/status][PORT/all]
Description: The link_trap command allows link traps to be
enabled or disabled either one port at a time or
all ports at once. Specifying a single port
number will affect only that port, while
specifying
all will affect every port. The current
status of a single port, or all ports, can also be
shown.
Options: Not Applicable
Example:
-> telnet 134.141.12.345
Trying 134.141.12.345
Connected to 134.141.12.345
SunOS UNIX (server1)
login:
telnet
-> link_trap status
Port 1 is ENABLED
Port 3 is ENABLED Port 2 is DISABLED
Port 4 is ENABLED
-> link_trap disable 2
-> link_trap disable all
linktrap
-> link_trap status 3
LINK TRAP STATUS:
Link traps have been DISABLED on port 2
Link traps have been DISABLED on all ports (1-4)
Link traps are ENABLED on port 3