Cabletron Systems 2M46-04R - Manual (Page 70)

Chapter 5: Local Management
5-22 2M46-04R/2M46-04RDC User’s Guide
3. Press ENTER. If the TFTP gateway IP address entered is a valid
format, the cursor returns to the beginning of the TFTP Gateway IP
Address field. If the entry is not valid, the Event Message Line
displays “INVALID TFTP GATEWAY IP ADDRESS OR FORMAT
ENTERED”. Local Management does not alter the current value, but
it does refresh the TFTP Gateway IP Address field with the previous
value.
4. Use the arrow keys to highlight the SAVE command.
5. Press ENTER. The Event Message Line at the top of the screen
displays “SAVED OK”.
5.7.5 Setting the Device Date
The 2M46-04R is year 2000 compliant so that the Device Date field can
be set beyond the year 1999. To set the system date, perform the following
steps:
1. Use the arrow keys to highlight the Device Date field.
2. Enter the date in this format: MM/DD/YYYY
3. Press ENTER to set the Device Date to the date in the input field.
4. Use the arrow keys to highlight the SAVE command at the bottom of
the screen and press ENTER.
If the date entered is a valid format, the Event Message Line at the top of
the screen displays “SAVED OK”. If the entry is not valid, Local
Management does not alter the current value, but it does refresh the
Device Date field with the previous value.
NOTE
It is not necessary to add separators between month, day, and
year numbers, as long as each entry uses two numeric
characters. For example, to set the date to 08/29/1997, type
“08291997” in the Device Date field.