Cabletron Systems 2M46-04R - Manual (Page 47)

Using the RESET Button
2M46-04R/2M46-04RDC User’s Guide 4-7
4.4 USING THE RESET BUTTON
The RESET button shown in Figure 4-3 resets the 2M46-04R processor
without affecting the NVRAM.
Figure 4-3 RESET Button
To reset the 2M46-04R processor, use a non-conductive tool to press and
release the RESET button. The 2M46-04R goes through the reset process
and then reenters the network.
NOTE
Clearing NVRAM may be performed via Local Management.
Section 5.7.11 describes this procedure. Additionally, NVRAM
may be cleared by changing the position of mode switch 7
(Clear NVRAM) as described in
Appendix C . It is only
necessary to use this method when it is not possible to access
Local Management.
!
CAUTION
Pressing the RESET button resets the device and all current
switching being performed by the device is halted. The
2M46-04R will be unavailable for up to two minutes as it boots
up.
RESET Button
2M46-04R
2314-37
PWR
CPU
RESET
COM