Cabletron Systems 2M46-04R - Manual (Page 113)

Interface Statistics Screen
2M46-04R/2M46-04RDC User’s Guide 5-65
MTU (Read-only)
The maximum transmission unit (MTU) field displays the maximum data
field size (in octets) that a frame may contain to be received or transmitted
from this interface.
Speed (Read-only)
The Speed field displays the interface’s theoretical maximum bandwidth
in bits per second.
Link Status (Read-only)
This field displays the current link status of the interface. This field
displays either Link or No Link.
Duplex Mode (Read-only)
This field indicates whether the interface is operating in normal (standard)
or full duplex mode. This field displays either Standard or Full Duplex.
Interface [ n ] (Selectable)
This command is used to enter an interface number for viewing statistics.
For instructions on how to use this command refer to
Section 5.20.1 .
CLEAR COUNTERS (Command)
This command is used to reset all statistic counters to zero. For details on
how to use this field, refer to
Section 5.20.2 .
5.20.1 Displaying Interface Statistics
To display the statistics for any interface, proceed as follows:
1. Use the arrow keys to highlight the Interface [n] field at the bottom of
the screen.
2. Press the SPACE bar to increment (or press the DEL [delete] key to
decrement) the interface number.
Press ENTER (neither the Interface # fields nor the statistics will change
until ENTER is pressed).