Cabletron Systems 2M46-04R - Manual (Page 90)

Chapter 5: Local Management
5-42 2M46-04R/2M46-04RDC User’s Guide
5.13 HIGH SPEED INTERFACE CONFIGURATION
MENU SCREEN
To access the High Speed Interface Configuration Menu screen,
Figure 5-18 , from the Device Specific Configuration Menu screen, use the
arrow keys to highlight the HIGH SPEED INTERFACE
CONFIGURATION menu item and press ENTER. The High Speed
Interface Configuration
Menu screen displays.
Figure 5-18 High Speed Interface Configuration Menu Screen
NOTE
This screen does not display unless one, or both, Fast Ethernet
Interface Modules AND an HSIM are installed.
This screen will also not display if the HSIM that is installed is
an HSIM-W6 or an HSIM-W84. Access to their Local
Management screens is via their respective ASYNC ports.
Refer to the associated HSIM user’s guides for more details.
If only Fast Ethernet Interface Modules or an HSIM is installed,
then the respective Fast Ethernet Interfaces screen or the
HSIM Setup screen displays instead of the High Speed
Interface Configuration Menu screen.
Firmware Revision: XX.XX.XX
High Speed Interface Configuration Menu
FAST ETHERNET INTERFACES
HSIMS
2314-53
Device Type: 2M46-04R
BOOTPROM Revision: XX.XX.XX
2M46-04R LOCAL MANAGEMENT
RETURN EXIT