Cabletron Systems 2M46-04R User Manual
Page 115
RMON Statistics Screen
2M46-04R/2M46-04RDC User’s Guide
5-67
The following definitions explain each field of the RMON Statistics
screen:
RMON Index (Read-only)
This field displays the current interface for which statistics are being
shown. The 2M46-04R has an embedded RMON agent that gathers
statistics for each interface on the module.
Data Source (Read-only)
This field displays the source of the statistics data that is currently being
displayed on the screen.
shows that the data source for this
RMON index is Interface 1 by displaying the name ifIndex.1, chosen by
the user in the selectable field at the bottom of the screen. If the screen
was displaying RMON statistics for Interface 2, the name displayed
would be ifIndex.2.
Owner (Read-only)
This field displays the name of the entity that last configured the device.
Status (Read-only)
The Status field displays the current operating status of the displayed
interface. This field will display “valid” or “invalid”.
Drop Events (Read-only)
This field displays the total number of times that the RMON agent was
forced to discard frames due to the lack of available switch resources.
Collisions (Read-only)
This field displays the total number of collisions that have occurred on
this interface.
Broadcast Pkts (Read-only)
The Broadcast Pkts field displays the total number of good frames that
were directed to the broadcast address. The value of this field does not
include multicast frames.
NOTE
The Drop Events field does not display the number of frames
dropped, it only displays the number of times that the RMON
agent was forced to discard frames.