Cabletron Systems 2M46-04R - Manual (Page 87)

System Resources Screen
2M46-04R/2M46-04RDC User’s Guide 5-39
PORT REDIRECT FUNCTION
The Port Redirect Function screen allows the user to redirect traffic from
one or multiple ports to a specific destination port. For details, refer to
Section 5.16 .
BROADCAST SUPPRESSION
The Broadcast Suppression screen allows the user to set a desired limit of
received broadcast frames that will be forwarded per port per second. For
details, refer to
Section 5.17 .
802.1Q VLAN CONFIGURATION
This menu item will only display if the 2M46-04R has been configured to
operate as an IEEE 802.1Q switch (
Section 5.7.9 , describes how to
configure the 2M46-04R to function as an 802.1Q switch). When
selected, this menu item opens the VLAN Main Menu screen. For details
on the VLAN Main Menu screen, refer to the Cabletron Systems Port
Based VLAN User’s Guide.
5.12 SYSTEM RESOURCES SCREEN
The System Resources screen, Figure 5-17 , provides information
concerning the processor used in the 2M46-04R and the amount of
FLASH memory, DRAM, and NVRAM that is installed and how much of
that memory is available. This screen also allows the user to monitor the
current processor (switch) utilization and the peak switch utilization.
To access the System Resources screen from the Device Specific
Configuration Menu screen, use the arrow keys to highlight the SYSTEM
RESOURCES menu item and press ENTER. The System Resources
screen displays.