Cabletron Systems 2M46-04R - Manual (Page 141)

Removing the Chassis Cover
2M46-04R/2M46-04RDC User’s Guide C-5
• Switch 7 – Clear NVRAM. Changing the position of this switch resets
NVRAM on either the next power-up or the next operation of the front
panel RESET button. All user-entered parameters, such as the IP
address, device names, etc., are reset to the factory default settings.
Once the 2M46-04R resets, you can either use the factory default
settings or reenter your own parameters.
• Switch 8 – Reset Password/Community Strings. Changing the position
of this switch clears user-entered passwords stored in NVRAM, and
restores the factory default passwords on either the next power-up or
the next operation of the front panel RESET button. Once the
2M46-04R resets, you can either use the factory default settings or
re-enter your own passwords.