Cabletron Systems 2M46-04R User Manual
Page 126
Chapter 5: Local Management
5-78
2M46-04R/2M46-04RDC User’s Guide
soft-reset:
Syntax:
soft-reset
Description:
This command restarts the software image,
which restores the user configuration settings
from NVRAM. The user will be queried to
confirm the reset command to ensure against
unwanted resets.
Options:
Not Applicable
Example:
telnet:
Syntax:
telnet [IP address]
Description:
The telnet command allows the user to
communicate with another host (that supports
Telnet connections) using the Telnet protocol.
The user must specify the remote host using its
IP address. The [IP address] field is mandatory.
If no Port number is specified, telnet will
attempt to contact the host at the default port.
Options:
Not Applicable
NOTE
The Network Tools connection to the device will be terminated
upon execution of this command.
-> soft-reset
174266
RESET: Are you *SURE* -> Y